Figuring out the right order for your skincare routine can be tricky. We wanted to give you a step-by-step plan, so you know the correct order for using your DERMAFLASH devices. Read on for the full routine (plus tips!) and use the chart at the end for quick reference.
First you flash!
At DERMAFLASH we have a saying…First you Flash! What does that mean? A full DERMAFLASH skincare routine always starts by “Flashing” with your LUXE+ device to remove peach fuzz and exfoliate dead skin cells. “You might not realize it, but peach fuzz and dead skin cells can act like a barrier that prevents your skincare products from fully absorbing,” explains licensed esthetician Billie Jo Bond. “When you remove that layer of buildup, the rest of your skincare routine will be more effective.” With that in mind, let’s get to your full DERMAFLASH routine!
How do I use my DERMAFLASH devices?
Here’s your complete sonic skincare routine, from start to finish. Keep in mind you’ll only need to Flash with LUXE+ once a week to see clinically proven results. The rest of the week, you’ll maintain your results with DERMAFLASH skincare. And you can use DERMAPORE+ as often as you like to unclog pores and infuse your skincare products.
Step 1. Prep your skin with PREFLASH
PREFLASH Cleanser is specially formulated to remove every trace of surface oil and leave your skin feeling temporarily tighter and drier. This allows you to get the “closest shave” when you’re removing peach fuzz.
To use: First, remove your makeup. Massage PREFLASH onto damp skin, then pat dry thoroughly. “The drier the canvas, the better your results,” explains DERMAFLASH founder Dara Levy.
Step 2. Flash with LUXE+
LUXE+ Sonic Dermaplaning gently removes the oldest layer of dead skin cells and vellus hair (aka peach fuzz) from your skin’s surface. The high-level sonic vibration “helps to get right under the peach fuzz for more effective removal and also stimulates microcirculation to further increase anti-aging benefits,” explains board-certified dermatologist Dr. Arisa Ortiz.
To use: Use one hand to gently pull your skin taut. Hold your LUXE+ device in your other hand, at a 45-degree angle to your skin. Flash using short, feathery strokes. You can move your device in any direction. (Avoid your lips, nose, eyebrows and the delicate skin right underneath your eyes.) Want more tips? Check out this video from our Head of Education.
Step 3. Soften clogs with PREP MIST
After exfoliating with LUXE+, it’s time to deep clean and extract pore-clogging debris—and for that you’ll use your DERMAPORE+ device. Before using it, mist your skin with PREP MIST. This face mist works like a “facial steamer in a bottle” to soften the gunk in your pores and make it easier to remove.
To use: Spray PREP MIST onto clean, damp skin. Keep your skin thoroughly wet the entire time you’re using DERMAPORE+ Extract Mode. If it becomes dry, just re-mist.
Step 4. Extract with DERMAPORE+
DERMAPORE+ uses high-level ultrasonic vibration to gently loosen stubborn pore-clogging debris. At the same time, the ionically charged spatula attracts debris like a “magnet” and gently draws it out. If you’re someone who tends to pick or squeeze blackheads, this device is a lifesaver—you’re able to unclog pores instantly without damaging your skin.
To use: Make sure your skin is thoroughly wet with PREP MIST. Active Extract Mode on your DERMAPORE+ device. Holding your device at a 45-degree angle, glide the tip of the spatula over clogged areas. You’ll see gunk start to build up—just wipe off as needed and continue extracting.
Step 5. Tone with Botanical Ketoacid Toner
A daily exfoliating toner is key to preventing debris from building up in pores. The tricky part can be finding one that works for your skin. Many exfoliating toners have harsh acids, but we formulated our Botanical Ketoacid Toner with a gentle acid blend, and we tested it in the lab (with real people) to make sure it’s safe for sensitive skin.
To use: Just pour onto a cotton pad or your fingertips and pat onto your face and neck. Use morning and night.
Step 6. Hydrate with HYDRAFLASH Serum
A well-formulated serum is your skin’s best friend. Our HYDRAFLASH Active Cocooning Serum (as the name implies) cocoons your skin in hydration while delivering targeted active ingredients that firm and brighten. It also layers smoothly under sunscreen without any pilling, and it doubles as a makeup primer.
To use: Squeeze the dropper while it’s in the bottle to make sure it’s full, then apply several drops to your face and neck and gently massage in. Use morning and night.
Step 7. Infuse with DERMAPORE+
In addition to Extract Mode, DERMAPORE+ has an additional Infuse Mode that boosts the benefits of your favorite skincare products. The high-level ultrasonic vibration and ionic technology work together to help “push” active ingredients deeper into your skin’s surface—give you better results from every drop.
To use: Apply HYDRAFLASH Serum, activate Infuse Mode, and glide the flat part of the spatula over your skin’s surface. You’ll feel a gentle micro-massage sensation.
The Order of Operations
|
1. Prep |
PREFLASH Cleanser |
1x per week (right before LUXE+) |
|
2. Flash |
LUXE+ Sonic Dermaplaning |
1x per week |
|
3. Soften |
PREP MIST |
With DERMAPORE+ Extract Mode |
|
4. Extract |
DERMAPORE+ Extract Mode |
As often as you like |
|
5. Tone |
Botanical Ketoacid Toner |
2x per day (a.m. + p.m.) |
|
6. Hydrate |
HYDRAFLASH Serum |
2x per day (a.m. + p.m.) |
|
7. Infuse |
DERMAPORE+ Infuse Mode |
As often as you like |
